What are the reasons and troubleshooting methods for the temperature deviation of the hydraulic oil of the film blowing machine?
Blowing MachineWhat are the reasons for the deviation of hydraulic oil temperature and how to eliminate it?
① If the cooling water flow is small, check whether there is a partial blockage of foreign matter in the maintenance pipeline. After removing the foreign matter, increase the cooling water flow.
②The parts in the oil pump are severely worn and the oil delivery efficiency is low, which causes the pump body to heat up. The oil pump should be inspected and repaired.
③ The oil pressure of the hydraulic circulating oil working system is adjusted too high and should be lowered appropriately. ④ The pressure relief of the oil return line in the hydraulic transmission system is not sufficient, and the pressure of the return oil is too high, so the pressure relief should be adjusted.
⑤The pipeline caliber in the hydraulic system is unreasonable, and the local pipeline caliber is not matched. The hydraulic oil flow resistance is large, causing the hydraulic oil to heat up, and there may be foreign matter in the local pipeline. The pipeline should be cleaned.
Shantou Shuangli Machinery Factory, professionally welcome new and old customers to inquire and inquire, we sincerely cooperate with you!
Related News
- What are the functions of the components of the film blowing machine?
- What is a film blowing machine
- Double-layer co-extrusion film blowing machine
- What is the reason for the poor permeability of the film blown by the PE film blowing machine
- How to maintain and repair the film blowing machine?
- Performance and use of blown film machine
- Precautions for the operation of film blowing machine
- Matters needing attention during maintenance of film blowing machine body
- New Modification of Film Blowing Machine
- Classification introduction of plastic film blowing machine
- How to compare the quality of high-speed film blowing machine
- Two parts of the energy-saving transformation of the film blowing machine are introduced, Shantou Zhongli Machinery will share with you
- Film blowing unit analyzes the distinction of film blowing machine for you, Shantou Zhongli shares with you
- Zhongli film blowing machine manufacturer Shantou Zhongli will explain to you what are the operating steps
- The film blowing unit tells you the importance of product quality and environmental protection, please see below
- Shantou Zhongli, a manufacturer of film blowing machine in Shantou, introduces its characteristics to everyone
- The preparation work of the Zhongli film blowing machine must be done before starting
- The preparation work of the Zhongli film blowing machine must be done before starting
- The important parameters of blown film unit Zhongli Machinery teaches you to identify
- What are the steps of heating transformation by the manufacturer of dual-force film blowing machine