The structure and function of the baffle plate of the film blowing machine
The baffle plate of the film blowing machine is made of brass plates. There are two pieces, respectively, on the left and right sides between the I and n rollers of the calender. Its function is to produce according to the amount of material used in the production before the calender is produced. And the required width of the product can be adjusted to determine the distance between the two stoppers to control the movement of the molten material into the roller position.
The working installation position and moving method of the baffle plate are shown in Figure 4-32. The picture shows the structure of a general-purpose baffle plate in the four-roll calender in the county. The baffle plate is fixed on the support frame by screws. There is a nut in the upper end hole of the support frame, and the nut is assembled on the screw rod in the beam. When the screw rotates (manually or motor-driven), the nut drives the baffle plate to move left and right, and the different size distances between the two baffle plates are obtained.
Related News
- What are the functions of the components of the film blowing machine?
- What is a film blowing machine
- Double-layer co-extrusion film blowing machine
- What is the reason for the poor permeability of the film blown by the PE film blowing machine
- How to maintain and repair the film blowing machine?
- Performance and use of blown film machine
- Precautions for the operation of film blowing machine
- Matters needing attention during maintenance of film blowing machine body
- New Modification of Film Blowing Machine
- Classification introduction of plastic film blowing machine
- The film blowing machine shares with you how to operate the most energy-saving operation, please see below
- Some related brief introductions of common sense of film blowing unit
- The film blowing machine shares with you how to operate the most energy-saving operation, please see below
- How to improve the film blowing technology of the film blowing machine
- The structure and function of the baffle plate of the film blowing machine
- Brief introduction of high and low pressure ultra-thin film blowing machine
- How to extend the service life of plastic film blowing machine
- What should I pay attention to when operating the vest bag film blowing machine?
- Shuangli Machinery shares with you the inspection and maintenance of the film blowing machine, please see below
- Method of degrading plastic film by PE film blowing machine