Precautions for the operation of plastic film blowing machine
Plastic film blowing machineOperation precautions:
1. If the equipment is not heated, the heating temperature and time are less than the specified requirements, do not start the extruder and rotating die, otherwise the equipment will be damaged.
2. When unpacking the raw materials, check whether there are wet materials. Wet materials must not be mixed. They must be dried in a drying room before they can be used.
3. When cleaning the die head and the die mouth, only the copper piece can be used to clean the die mouth. Do not use a spatula or iron piece to scrape the die mouth, otherwise it will cause damage to the die mouth.
4. The guide roller of the plastic film blowing machine, including the rubber roller and the winding roller, must not be cut with a blade, otherwise it will cause scratches on the guide roller.
5. The filter screen of the extruder and the corona treatment machine must be replaced and cleaned regularly. Generally, the filter screen must be replaced within 24 to 48 hours and the silicone roller of the corona treatment machine must be cleaned with alcohol. Filter specifications: two-layer 80 mesh, one-layer 100-mesh three-layer filter.
6. The corona processor should not be turned on if the guide roller of the corona treatment machine does not move with the film. Once the film is cut off or shut down, the corona treatment machine should be turned off urgently to avoid the corona treatment machine from burning out.
7. Films without corona treatment or with a corona treatment of less than 38 dyne shall not be put into the finished product, otherwise it will cause a major accident of composite quality.
Related News
- What are the functions of the components of the film blowing machine?
- What is a film blowing machine
- Double-layer co-extrusion film blowing machine
- What is the reason for the poor permeability of the film blown by the PE film blowing machine
- How to maintain and repair the film blowing machine?
- Performance and use of blown film machine
- Precautions for the operation of film blowing machine
- Matters needing attention during maintenance of film blowing machine body
- New Modification of Film Blowing Machine
- Classification introduction of plastic film blowing machine
- Pe plastic film blowing machine
- Maintenance method of plastic film blowing machine
- How to operate the film blowing unit
- Master the working principle of PE film blowing machine to produce high-quality PE film
- Shuangli Machinery tells you how to improve the film blowing technology of the film blowing machine
- Shantou Shuangli Machinery Factory fully supports the 2017 China Tongcheng (Xindu) Plastic Machinery Fair
- The double force film blowing machine tells you what to pay attention to during the use of the film blowing machine
- Shantou Shuangli Plastic Machinery gained a lot in the "2017 China Tongcheng Plastic Packaging Machinery Exhibition"
- The advantages of the film blowing machine after the transformation of the three crystal inverter
- Shuangli Machinery wishes everyone a happy Dragon Boat Festival