How to control the size, thickness and tension of plastic bags during the production process of the film blowing machine
In order to obtain quality controllable plastic bag products during the processing of the film blowing machine, it is necessary to control all processing links in place. Under normal circumstances, the processing process of the plastic film blowing machine is divided into feeding heating, traction, and controlled air compression. After adding air to the blowing hole of the film head, the air is added to the middle of the round film, and the film rises in a straight line. The size of the plastic bag is controlled by the amount of air blowing, and then the film stabilizer is used to stabilize the film. The thickness is controlled by the main engine and the traction speed. It can be understood that the faster the main engine speed, the faster the feeding speed, the thicker the film, and the opposite is true for the traction. The faster the pull, the thinner the film, which is the most important link.
In order to achieve good horizontal and vertical tensile force of the blown film, it is necessary to achieve a certain ratio of blow up ratio BUR and traction ratio DDR. If the ratio is not adjusted, the transverse tension will decrease. If the bubble is stable under the existing die head and folding diameter, then there is no problem with the BUR. If the bubble is unstable, the BUR is too large; DDR=die Orifice gap/(film thickness×BUR)
To reduce the DDR, you need to reduce the die gap. Reducing the BUR will only make the DDR larger. If the film swings unstable when the film is blown, it means that the film head is too small. You can use a fixing frame to stabilize the film.
Related News
- What are the functions of the components of the film blowing machine?
- What is a film blowing machine
- Double-layer co-extrusion film blowing machine
- What is the reason for the poor permeability of the film blown by the PE film blowing machine
- How to maintain and repair the film blowing machine?
- Performance and use of blown film machine
- Precautions for the operation of film blowing machine
- Matters needing attention during maintenance of film blowing machine body
- New Modification of Film Blowing Machine
- Classification introduction of plastic film blowing machine
- Proper shutdown can extend the service life of the film blowing machine
- Double force film blowing machine participated in the 13th China Chengdu Rubber Plastics and Packaging Industry Exhibition
- How to achieve the best power saving state of the film blowing machine
- The development of blown film machines to high-end is an inevitable trend
- Letter on the review of the environmental impact report form for the construction project of the annual production line of 160 plastic film blowing machines in the Xindu plant of Shantou Shuangli Plastic Machinery Co., Ltd.
- Shuangli participated in the 2019 13th China Chengdu Rubber, Plastics and Packaging Industry Exhibition
- Shuangli participated in the 2019 3rd China Tongcheng (Xindu) Plastic Packaging Machinery Fair